A small, lightweight “travel router”, it features dual-band operation and supports 802.11ac. [ 0.553291] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 9.717868] nf_conntrack version 0.5.0 (2048 buckets, 8192 max) baudrate=115200 [ 0.459743] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 21.005246] usbcore: registered new interface driver cdc_wdm I/O unit sizes: 2048/2048, sub-page size 2048 [ 3.955099] usbcore: registered new interface driver usbfs Ensure that you are not using 5 V, “TTL”, or “RS232” levels. Keep it plugged in until the reset completes. [ 5.600852] scsi host0: usb-storage 2-1.1:1.0 Vendor specifications, including annotated board photos, are presently available at https://docs.gl-inet.com/en/3/hardware/ar750s/. [ 11.279962] kmodloader: loading kernel modules from /etc/modules-boot.d/* While data stored in your Google Account can be restored, all apps and their data will be uninstalled. [ 22.182353] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) Jabber Tech 19,088 views. ; At the top right, tap More Factory reset Factory reset. If you do need to extend your ethernet ports, then yes you can add a switch to increase your port count. [ 0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns [ 2.596737] random: fast init done This is currently the only travel size router that has GB ports, most of the rest only have 10/100. [ 0.615007] m25p80 spi0.0: found w25q128, expected m25p80 [ 20.517579] kmodloader: loading kernel modules from /etc/modules.d/* [ 13.079456] random: procd: uninitialized urandom read (4 bytes read) Click on AR750 14. Other notable features include a built-in microSD interface (vendor states support up to 128 GB), USB 2.0, and internal access to I2C, UART, and various GPIO.Power is supplied through a micro-USB socket. Does that mean they have an SMA connection that would work with upgraded antennas? [ 0.106526] futex hash table entries: 256 (order: -1, 3072 bytes) SGMII in forced mode [ 50.292458] br-lan: port 1(eth0.1) entered forwarding state [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0 Booting image at: 0x9F060000 Once in U-Boot HTTP mode, either a NOR or a NAND image can be uploaded with the single file-selection and upload button pair.

[ 20.672079] Netfilter messages via NETLINK v0.30. Consult the manual of your main router to check if WDS is supported or not. [ 16.847140] mount_root: switching to ubifs overlay Make sure that you choose the generic image format for your platform. [ 0.000000] memory: 08000000 @ 00000000 (usable) athrs17_reg_init: complete Entry Point: 80060000 [ 62.915494] br-lan: port 2(wlan0) entered forwarding state We recommend checking your manufacturer's support site for device-specific instructions. A factory data reset erases your data from the phone. [ 34.513858] usbcore: registered new interface driver option Power is supplied through a micro-USB socket. The slot isn’t hot plug either, so if you insert a card you do have to reboot your router. Maybe worth looking at something a bit “bigger” like their B1300 Convexa which I’ve also reviewed here on the Gadgeteer. Connect AR750 to WAN/Internet Connection 2. GL-E750 Mudi OpenWrt Router. So the speed might not be there, in fact we’ve taken a drop,  but the security as described above is. If there’s a login screen to validate your usage like many hotels or coffee shops have you should only have to do this once with your first attached device. It’s definitely very flexible and packs functions and features that punch well above its size. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] Please check out the article Flash layout. ; else ERROR! Wait about to 2 to 3 minutes for the AR750 to fully power up 5. As such I’m going to do a review of the AR750S, compare it to their  MT300N and then demonstrate some of the advantages of using a travel router. [ 32.961074] firmware ath10k!QCA9887!hw1.0!board-2.bin: firmware_loading_store: map pages failed [ 0.594159] console [ttyS0] enabled While data stored in your Google Account can be restored, all apps and their data will be uninstalled. Uncompressing Kernel Image ... OK *** Warning - bad CRC, using default environment Only 4 easy steps to access the Internet while traveling.

[ 0.652084] 0x000000040000-0x000000050000 : "u-boot-env" [ 10.653458] ath10k_pci 0000:00:00.0: Falling back to user helper [ 21.734875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready So what’s the advantage of a dual-band router when traveling and using in WISP repeater mode? Hit 'gl' to stop autoboot: 0 [ 0.738660] libphy: Fixed MDIO Bus: probed Remove the two screws revealed by removal of the two feet. OpenWrt Wi-Fi Routers for Things. Device 0 bad blocks:

You could easily add a small switch and connect to one of the LAN ports to increase Ethernet port count. [ 9.704757] ip_tables: (C) 2000-2006 Netfilter Core Team To be ready to restore your data, make sure that it's in your Google Account. [ 22.103399] usbcore: registered new interface driver sierra_net [ 118.288182] random: crng init done. [ 4.070379] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2 Trying eth0 Server not reachable! Connect your laptop to LAN port on AR750 3. Please fill in real values for this device, then remove the EXAMPLEs, ucidef_add_switch “switch0” “0@eth0” “2:lan:2” “3:lan:1” “1:wan”. Unit delivered in November, 2018 has the “advanced” screens (LuCI) showing Powered by LuCI openwrt-18.06 branch (git-18.196.56128-9112198) / OpenWrt 18.06.0-rc1 r7090-d2aa3a1b62. [ 6.199838] eth0: link up (1000Mbps/Full duplex) [ 0.415373] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] Significant changes include the use of GigE interfaces.

Be sure that you know the password for the Google Account on the phone.

It’s smaller size and lower power consumption means it’s easier to carry and will last longer on my powerbank or when attached to the USB port of my Surface Pro. [ 21.978298] PPP MPPE Compression module registered Click on v1 15.

[ 11.612640] ehci-platform ehci-platform.1: EHCI Host Controller Verifying Checksum at 0x9f060040 ...OK [ 8.458270] jffs2: notice: (473) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 1 orphan) and 1 of xref (1 dead, 0 orphan) found. Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 Please fill in real values for this device, then remove the EXAMPLEs Network interfaces. [ 21.062090] ip_tables: (C) 2000-2006 Netfilter Core Team 128 MB Filename 'openwrt-gl-ar750s.img'. [ 4.115466] hub 2-0:1.0: USB hub found

How-To Setup the GL-AR750S Slate Travel VPN Router by Gl.iNet Review - Duration: 15:13. Qualcomm Atheros SPI NAND Driver, Version 0.1 (c) 2014 Qualcomm Atheros Inc. Created: 2018-11-19 10:38:41 UTC [ 3.998719] ehci-platform: EHCI generic platform driver There’s a USB 2 port for USB stick or USB 4G MiFi device, and finally a micro-USB port for power. [ 12.729147] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256 SPI NAND flash on the ath79 target is only supported on Linux 4.19 and later. I can mention here various asus routers or linksys ones. [ 17.089293] procd: - early - [ 2.559974] bridge: filtering via arp/ip/ip6tables is no longer available by default. [ 7.433028] This architecture does not have kernel memory protection. eth0 up

Update your scripts to load br_netfilter if you need this. Load Address: 80060000 they're used to gather information about the pages you visit and how many clicks you need to accomplish a task. [ 12.758490] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 25224 iram: 12548' [ 11.629296] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000 [ 22.533841] ath10k_pci 0000:00:00.0: Falling back to user helper If sysupgrade does not support this router, use mtd. [ 62.448226] br-lan: port 3(wlan1) entered forwarding state Vendor advertises 17 Mbps for OpenVPN and 68 Mbps for WireGuard in August, 2018. [ 49.084725] device eth0 entered promiscuous mode lf=if ping $serverip; then tftp $loadaddr $firmware_nand_name && erase $firmware_addr +$kernelsize && nand erase && cp.b $fileaddr $firmware_addr $kernelsize && nand write $rootfs_addr 0 $rootfs_size && echo OK! [ 2.582807] UBI: auto-attach mtd5 Unlike the small Mango, the Slate takes 5V/2A compared with 5V/1A. [ 11.116538] ath10k_pci 0000:00:00.0: Falling back to user helper

The top of the unit is integral with the front (with the LED holes/markings), It is retained with two clips on each side, three across the back, and two at the edge of the front, at the level of the PCB. If you've set a screen lock, be sure that you know your phone's PIN, pattern, or password. It can then be removed. I/O unit sizes: 2048 bytes/2048 bytes Do you have any experience with this? [ 0.601708] bootconsole [early0] disabled [ 10.786369] firmware ath10k!QCA9887!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed They did not seem able to drive the RX line high enough. You can perform a factory reset on your Chromecast by using one of the following methods: Note: This option is only available if you still have access to the network your Chromecast was set up on. You connect to a WiFi network via WiFi on your mobile router and it creates a LAN on the other side with a firewall in between and clients on a different subnet. Schematic PDF MCU Datasheet Chinese AMS1117 Datasheet Chinese English User and Dev Manual Chinese, English (update 20151009) MCU programming tools and drivers ( Chinese and English MCU source code for Keil 4.0, Chinese, English (only main.c is commented in English) [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns [ 0.102977] futex hash table entries: 256 (order: -1, 3072 bytes) 2 switch registered on ag71xx-mdio.0

[ 9.799878] xt_time: kernel timezone is -0000 Device ships with “close to the tree” OpenWrt pre-installed with a set of packages and a GUI that are targeted at travel use, including repeater and VPN functions. Click on Next 9. [ 10.940995] firmware ath10k!QCA9887!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed eth0 up [ 0.524420] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.

Soldering is, however, strongly suggested if file transfer over serial is involved.

[ 7.391771] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 12.746960] hub 2-1:1.0: 4 ports detected ath_gmac_enet_initialize: reset mask:c02200 Using eth0 device [ 0.000000] Writing ErrCtl register=00000000 Also, your will not get access to the mini router again before you do a factory reset. [ 0.000000] Memory: 124420K/131072K available (3652K kernel code, 159K rwdata, 856K rodata, 188K init, 217K bss, 6652K reserved, 0K cma-reserved)

Dragonfly ----> S17 PHY * [ 34.643638] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47 [ 0.395077] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] The GL.iNet GL-AR750S is a 2018 release, which is covered at GL.iNet GL-AR750S. Using fixed address Note that soldering to the serial or I2C lands will require careful removal of the u.FL-like connectors for the antenna, as well as the heat sink on the back of the board.

[ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x47c with crng_init=0 [ 0.431325] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref] Connect AR750 to WAN/Internet Connection 2. Read on…….